Marine Automation Systems — AMS, PMS, PLC & Safety Controls Egypt
Comprehensive marine instrumentation, propulsion remote controls, 15 ppm bilge alarms, oil discharge monitoring (ODME), power management systems, and custom PLC/SCADA programming across all 52 Egyptian commercial ports.
Quick Service Specifications: Marine Automation & Control (Egypt)
- Service Classification: Engine Alarm Monitoring (AMS), Power Management (PMS), Main Engine Remote Control, Steering Gear Automation, Bilge & Ballast Automation.
- Regulatory Framework: SOLAS Ch. II-1 Reg. 31 (UMS), MARPOL Annex I (MEPC.107(49)), IACS Unified Requirements E10, M35, M36.
- Class Approvals: ABS, DNV, Bureau Veritas (BV), ClassNK, Lloyd’s Register (LR), RINA, IRS.
- Supported Systems: Kongsberg, Nabtesco, Lyngsø Marine, Deif, Siemens, Omron, WAGO, Rivertrace, Deckma Hamburg, Schaller OMD.
- 24/7 Readiness: Mobile calibration workshops attending Alexandria, Suez, Port Said, Damietta, and Ain Sokhna <2 hours.
Engine Room Automation & Safety Systems
Explore our certified automation engineering services and system components:
Alarm Monitoring & Control (AMS) →
ECR mimic consoles, exhaust gas temp alarms, bearing temperature monitoring, and UMS certification.
Integrated Automation System (IAS) →
Distributed I/O networks, redundant dual Ethernet rings, and vessel-wide SCADA monitoring.
Power Management System (PMS) →
Generator auto-start, auto-synchronization, active/reactive load sharing, and blackout recovery.
Main Engine Remote Control →
Bridge and ECR maneuvering levers, pneumatic logic blocks, electronic governor speed settings.
Engine Order Telegraph (EOT) →
Standard and emergency telegraph units, wrongful direction interlocks, and audible alarms.
Engine Safety Shutdown Systems →
Independent electronic and mechanical overspeed trips, low lube oil pressure safety shutdowns.
Steering Gear Automation →
Dual hydraulic power unit changeover panels, solenoid valves, and rudder angle transmitters.
Boiler Control & Safety Systems →
Burner flame safeguard controllers, feed water level automation, steam pressure modulators.
15 ppm Bilge Alarm & OWS →
MEPC.107(49) annual calibration, cell cleaning, auto-stopping valve check, and calibration certificate.
ODME Oil Discharge Monitoring →
Tanker ballast water monitoring, oil content meters, flow transmitters, and GPS date-time loggers.
Oil Mist Detectors (OMD) →
Crankcase explosion prevention, optical sensor cleaning, air regulator service, Schaller / Daihatsu.
Marine PLCs & HMI Programming →
Siemens S7, WAGO 750, Omron, Schneider PLC diagnosis, logic modifications, touch panel replacements.
Tank Level Gauging & Alarms →
Radar and hydrostatic level transmitters, 95%/98% overfill alarm switches for cargo and bunker tanks.
Valve Remote Control (VRCS) →
Hydraulic power packs, pneumatic solenoid cabinets, actuator position feedback sensors.
Ballast Water Treatment Automation →
BWMS TRO sensor calibration, UV intensity control, and automated logging for Port State Control.
Water Ingress Alarm Systems →
Bulk carrier cargo hold water ingress detectors, bridge mimic panels, and de-watering interlocks.
Emergency Stop & Quick Closing Valves →
Pneumatic QCV release boxes, fuel pump trips, boiler fuel solenoid shutoffs, and line tests.
Bunker Mass Flow Monitoring →
Coriolis mass flow meter telemetry, fuel density calibration, and aeration tamper detection.
24/7 Automation Attendance Across 52 Egyptian Ports
Seanav Mirai provides immediate dispatch of marine automation and electronic engineers across all 52 Egyptian ports, petroleum docks (Zaytiyat, Ain Sokhna, Sidi Krir), and Suez Canal anchorages.
24/7 Technical Coordination: +20 10 61806201 |
Email: service@smegypt.com |
Dispatch Engineer Now →